Kit motore passo-passo CNC 3 assi TB6560 1,9 Nm 1,8 gradi Nema 23 motore passo-passo e driver

This CNC kit included:

• 1 x 3 Axis TB6560 CNC Stepper Motor Driver Board
• 3 x 1.9Nm (269oz.in) of Nema 23 Stepper Motor
• 1 x 201W 24V 8.3A 115/230V Switching Power Supply
• 1 x DB25 Parallel Cable & Manual CD

3 Axis TB6560 CNC Driver Board

• Toshiba TB6560AHQ chip - High power, maximum current 3.5A
• Resolution 1, 1/2, 1/8, 1/16 micro stepping output
• Working voltage DC12-DC30V, rated voltage 24V
• Adjustable current with 100%, 75%, 50%, 20% of full current by on-board switch.
• Half current function when no signal to prevent motor heating.
• Build with a 227V 10A Relay.
• Manual Control circuit included.
• Overload, over-current and over-temperature safety.
• Protect the computer by using isolating power(1000V DCDC) and optoelectronic coupler.
• Supports most parallel software MACH3, KCAM4, EMC2 etc.
• Fixed in Aluminum box, better cooling function than fan and safer protection for board circuit.

Stepper Motor

• Manufacturer Part Number: 23HS30-2804S
• Motor Type: Bipolar Stepper
• Step Angle: 1,8 gradi
• Holding Torque: 1.9Nm (269oz.in)
• Rated Current/phase: 2.8A
• Voltage: 3.2V
• Phase Resistance: 1.13ohms
• Inductance: 5.4mH ± 20%(1KHz)
• Frame Size: 57 x 57mm
• Body Length: 76mm
• Shaft Diameter: Φ6.35mm
• Shaft Length: 21mm
• Number of Leads: 4
• Lead Length: 500mm
• Weight: 1100g

Switching Power Supply

• 24V DC 8.3A output
• AC input voltage range: 93~132V/176~264VAC
• 115V/230V AC selected by switch
• High efficiency low cost
• Free air cooling convection
• Low output ripple and yawp
• Over current, over voltage, short circuit and overheat protections
• 215*115*50mm (L*W*H)

Risorse

• Manuale del conducente: ST-6560V3.pdf
• Scheda tecnica del motore: 23HS30-2804S.pdf
• Manuale di alimentazione: S-201-24.pdf